Menu
MANUFACTURER & DISTRIBUTOR of Mecal Products in North America

Accessories

PSHRS - Press Shut Height Regulating System

PSHRS Spec Sheet - PDF

Back to top

  • Allows a quick variation of the lower dead point of the PI07C and TT press.
  • Total range is 2.7mm. with 0.03mm. increment.
  • Accommodates applicators that do not offer a regulating head.

PSHRS

PWO7 - Paper Winder

PW07 Spec Sheet - PDF

Back to top

  • Motorized accessory to unroll and collect the paper from the terminal reel.
  • Installed on the terminal reel arm.

PWO7

PWDO7 - Paper Winder & Dereeler

PWD07 Spec Sheet - PDF

Back to top

  • This assembly collects the paper of terminal reel and unrolls the terminal strip very smoothly.
  • Produces consistent positioning of the terminals over the anvils to allow for perfect crimp geometry. 

PWDO7

QCBP - Quick Change Base Plate

QCBP Spec Sheet - PDF

Back to top

  • Allows easy clamping and removal of the Mini Applicator
  • Fits almost any existing Mecal Press
  • Specific version to accommodate the SCII / SCI9 module is also available
  • Part number - 881430162 Non Stripper Unit Design
  • Part number - 881430164 Designed for Stripper Units

QCBP

MBS-10307 - Slug Puller

Back to top

  • Don't hurt the wire or your fingers anymore.
  • This lightweight easy to use tool was designed for pulling off the slug of a precut but?not fully stripped wire.
  • Made of a durable plastic to help guard from damage to the wire.
  • Use for a wide range of wire gauges and insulation coatings.

Slug puller

SC11 - Stripper Crimper

SC11 Spec Sheet - PDF

Back to top

PART NUMBER
790000016
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-3mm2 (32-12 AWG) ø isolante max 4.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
JACKET STRIPPING LENGTH
(min 0.98" )* min 25*mm
  • Wire-stripping unit that's integrated with a crimping station (press and applicator).
  • On one movement, wire is grabbed, stripped and moved over the anvil.
  • Can strip wires up to 3mm2.
  • Works with both end and side-feed applicators.
  • Pneumatic actuating system grants ease of installation, use and maintenance.
  • It can be cycled either by pedal or by a sensor that detects the presence of the wire

SC12

SC12 - Stripper Crimper

SC12 Spec Sheet - PDF

Back to top

SC12 - Stripper Crimper Video

PART NUMBER
790000023
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-6mm2 (32-9 AWG) ø isolante max 5.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm

  • Wire-stripping unit that's integrated with a crimping station (press and applicator).
  • On one movement, wire is grabbed, stripped and moved over the anvil.
  • Can strip wires up to 6mm2.
  • Works with both end and side-feed applicators.
  • Pneumatic actuating system grants ease of installation, use and maintenance.
  • It can be cycled either by pedal or by a sensor that detects the presence of the wire.
  • Specifically designed to handle closed-barrel terminals.

SC13

SC19 - In Line Stripping Unit

SC19 Spec Sheet — PDF

Back to top

PART NUMBER
790000030
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 260 x H 120 x D 120
DIMENSION (")
W 10.2" x H 4.72" x D 4.72"
WEIGHT
(9.88 lb) 4.5 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-2.5mm2 (32-13 AWG) ø isolante max 3.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
JACKET STRIPPING LENGTH
(min 0.78")* min 20*mm

  • Electro-pneumatic actuating system grants ease of installation, use and maintenance.
  • It can strip a wire up to 2.5 mm2.
  • Cycled either by pedal or by a sensor that detects the presence of the wire.
  • Can be coupled to end-feed mini applicators or side-feed mini applicators.
  • Can be used with multiple-core wires.
  • When crimping side-feed terminals linked by front carrier, the minimum jacket stripping length is 20mm.
  • Side-feed terminals the minimum jacket stripping length is 15mm.
  • Quick set-up time and easy maintenance.

SC19

TBPR - Heavy Duty Carrier Strip Cutter

TBPR Spec Sheet - PDF

Back to top

PART NUMBER
871600072
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 105 x H 197 x D 90
DIMENSION (")
W 4.13" x H 7.75" x D 3.54"
WEIGHT
(6.22 lb) 2.8 Kg

  • Allows the carrier strip to be chopped dropping the scrap out of the way.
  • Can handle carrier strip thickness above 1.5mm.
  • A special external pneumatic actuating kit must be used to fit the TBPR cutter to a crimping press

TBPR

SMST - Crimp Pull Test Gauge

SMST Spec Sheet - PDF

Back to top

SMST Applicator Video

PART NUMBER
871920160
POWER
battery 12V (rechargeable). 700 - 1100 m AH (depending on model)
CHARGING DEVICE
115 - 230 VAC
BATTERY CAPACITY
4 hours continuous operation (charge display on pc)
MAX FORCE
20 kN
MAX RESOLUTION
0.25 N
MEASUREMENT ACCURACY HEIGHT
3 um
DIMENSION (mm)
140 x 90 x 140
WEIGHT
2.5 kg
INTERFACE
RS232
RELAY OUTPUT
potential free 24V DC (switching cycles programmable)
  • Easy to use Electro Mechanic Device.
  • All measured data are stored in a database and generate various reports.

SMST2

Mecal News

2018 Electrical Wire Processing Technology Expo

Visit Us at the 2018 Electrical Wire Processing Technology Expo We will be located in Booth #1826 on Wednesday, May 9 from 9am – 4pm and Thursday, May...
Learn More


The Evolution Starts Here!

*Mecal by Starn is now offering a wider range of applicators to better fit your needs.  Look for our ad in the January/February edition of...
Learn More


Mecal by Starn is Partnering with Samtec on all Terminal Applicators

*Mecal by Starn is pleased to announce that they have been selected as the preferred OEM supplier and partner for all Samtec terminal applicators. Mecal...
Learn More