Menu
MANUFACTURER & DISTRIBUTOR of Mecal Products in North America

Accessories

PSHRS - Press Shut Height Regulating System

PSHRS Spec Sheet - PDF

Back to top

  • Allows a quick variation of the lower dead point of the PI07C and TT press.
  • Total range is 2.7mm. with 0.03mm. increment.
  • Accommodates applicators that do not offer a regulating head.

PSHRS

PWO7 - Paper Winder

PW07 Spec Sheet - PDF

Back to top

  • Motorized accessory to unroll and collect the paper from the terminal reel.
  • Installed on the terminal reel arm.

PWO7

PWDO7 - Paper Winder & Dereeler

PWD07 Spec Sheet - PDF

Back to top

  • This assembly collects the paper of terminal reel and unrolls the terminal strip very smoothly.
  • Produces consistent positioning of the terminals over the anvils to allow for perfect crimp geometry. 

PWDO7

QCBP - Quick Change Base Plate

QCBP Spec Sheet - PDF

Back to top

  • Allows easy clamping and removal of the Mini Applicator
  • Fits almost any existing Mecal Press
  • Specific version to accommodate the SCII / SCI9 module is also available
  • Part number - 881430162 Non Stripper Unit Design
  • Part number - 881430164 Designed for Stripper Units

QCBP

MBS-10307 - Slug Puller

Back to top

  • Don't hurt the wire or your fingers anymore.
  • This lightweight easy to use tool was designed for pulling off the slug of a precut but?not fully stripped wire.
  • Made of a durable plastic to help guard from damage to the wire.
  • Use for a wide range of wire gauges and insulation coatings.

Slug puller

SC11 - Stripper Crimper

SC11 Spec Sheet - PDF

Back to top

PART NUMBER
790000016
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-3mm2 (32-12 AWG) ø isolante max 4.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
JACKET STRIPPING LENGTH
(min 0.98" )* min 25*mm
  • Wire-stripping unit that's integrated with a crimping station (press and applicator).
  • On one movement, wire is grabbed, stripped and moved over the anvil.
  • Can strip wires up to 3mm2.
  • Works with both end and side-feed applicators.
  • Pneumatic actuating system grants ease of installation, use and maintenance.
  • It can be cycled either by pedal or by a sensor that detects the presence of the wire

SC12

SC12 - Stripper Crimper

SC12 Spec Sheet - PDF

Back to top

SC12 - Stripper Crimper Video

PART NUMBER
790000023
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 212 x H 96 x D 98
DIMENSION (")
W 8.32" x H 3.78" x D 3.86"
WEIGHT
(11.2 lb) 5.1 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-6mm2 (32-9 AWG) ø isolante max 5.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm

  • Wire-stripping unit that's integrated with a crimping station (press and applicator).
  • On one movement, wire is grabbed, stripped and moved over the anvil.
  • Can strip wires up to 6mm2.
  • Works with both end and side-feed applicators.
  • Pneumatic actuating system grants ease of installation, use and maintenance.
  • It can be cycled either by pedal or by a sensor that detects the presence of the wire.
  • Specifically designed to handle closed-barrel terminals.

SC13

SC19 - In Line Stripping Unit

SC19 Spec Sheet — PDF

Back to top

PART NUMBER
790000030
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 260 x H 120 x D 120
DIMENSION (")
W 10.2" x H 4.72" x D 4.72"
WEIGHT
(9.88 lb) 4.5 kg
POWER SUPPLY
18 V AC. 24 V DC
WIRE SECTION
0.2-2.5mm2 (32-13 AWG) ø isolante max 3.5mm
STRIPPING LENGTH
(0.078 - 0.473") 2 - 12mm
JACKET STRIPPING LENGTH
(min 0.78")* min 20*mm

  • Electro-pneumatic actuating system grants ease of installation, use and maintenance.
  • It can strip a wire up to 2.5 mm2.
  • Cycled either by pedal or by a sensor that detects the presence of the wire.
  • Can be coupled to end-feed mini applicators or side-feed mini applicators.
  • Can be used with multiple-core wires.
  • When crimping side-feed terminals linked by front carrier, the minimum jacket stripping length is 20mm.
  • Side-feed terminals the minimum jacket stripping length is 15mm.
  • Quick set-up time and easy maintenance.

SC19

TBPR - Heavy Duty Carrier Strip Cutter

TBPR Spec Sheet - PDF

Back to top

PART NUMBER
871600072
AIR PRESSURE
5-7 Bars (70-100psi)
DIMENSION (mm)
W 105 x H 197 x D 90
DIMENSION (")
W 4.13" x H 7.75" x D 3.54"
WEIGHT
(6.22 lb) 2.8 Kg

  • Allows the carrier strip to be chopped dropping the scrap out of the way.
  • Can handle carrier strip thickness above 1.5mm.
  • A special external pneumatic actuating kit must be used to fit the TBPR cutter to a crimping press

TBPR

SMST - Crimp Pull Test Gauge

SMST Spec Sheet - PDF

Back to top

SMST Applicator Video

PART NUMBER
871920160
POWER
battery 12V (rechargeable). 700 - 1100 m AH (depending on model)
CHARGING DEVICE
115 - 230 VAC
BATTERY CAPACITY
4 hours continuous operation (charge display on pc)
MAX FORCE
20 kN
MAX RESOLUTION
0.25 N
MEASUREMENT ACCURACY HEIGHT
3 um
DIMENSION (mm)
140 x 90 x 140
WEIGHT
2.5 kg
INTERFACE
RS232
RELAY OUTPUT
potential free 24V DC (switching cycles programmable)
  • Easy to use Electro Mechanic Device.
  • All measured data are stored in a database and generate various reports.

SMST2

Mecal News

The Evolution Starts Here!

*Mecal by Starn is now offering a wider range of applicators to better fit your needs.  Look for our ad in the January/February edition of...
Learn More


Mecal by Starn is Partnering with Samtec on all Terminal Applicators

*Mecal by Starn is pleased to announce that they have been selected as the preferred OEM supplier and partner for all Samtec terminal applicators. Mecal...
Learn More


Customer Training Courses

Free Customer Training at Mecal by Starn: *Mini Applicator Assembly & Testing  (Up to five people) * mrs new2 A basic introductory course that covers assembly and testing of...
Learn More