Mecal by Starn | Machines

Machines

Fully programmable wire stripping and crimping equipment.
Open barrel terminal with left side or rear feeding.
135.8 mm shut height Mecal standard Applicator.
Any Western or Asian styled Applicator with different shutheight and stroke can be installed when using a dedicated Press set up (optional).
State of the art features assure the highest quality crimping on a wide range of applications.
Any wire from 0,05 to 6 mm² can be trimmed, stripped and cut off in case of faulty crimping.
All stripping slugs are collected by means of a suction device into a little tank outside the machine.
Highest flexibility and best performances on the market.

PART NUMBER: 8Z3500800
AIR PRESSURE: 5-7 bar
DIMENSION (mm): W 840 x H 880 x D 460
DIMENSION ("): W 33 x H 34.65 x D 18.11
WEIGHT: 100 Kg (220 lb)
POWER: 0.55 KW (0.75 HP) single phase
POWER SUPPLY: different arrangements available
WIRE RANGE: 0.05 - 6.00 mm²(AWG 30 - 8)
MAX INSULATION DIAMETER: 6 mm (0.23")
MAX STRIPPING LENGTH: 12 mm (0.46")
MIN JACKET STRIPPING LENGTH: 15 mm (0.59")
MAX TRIMMING LENGTH: 4 mm (0.15")
MAX BAD TERMINAL CUT OFF & ZERO CUT:: 6 mm²(AWG 8)
CYCLE TIME: 1.2 sec (5mm stripping. trimming. crimping)
GENERAL CONFIGURATION: according to the international standard and CE regulation

Fully programmable wire stripping and crimping equipment.
Open barrel terminal with left side or rear feeding.
135.8 mm shut height Mecal standard Applicator.
Any Western or Asian styled Applicator with different shutheight and stroke can be installed when using a dedicated Press set up (optional).
State of the art features assure the highest quality crimping on a wide range of applications.
Any wire from 0.05 to 6 mm² can be trimmed, stripped and cut off in case of faulty crimping.
All stripping slugs are collected by means of a suction device into a little tank outside the machine.
Highest flexibility and best performances on the market.