Mecal by Starn | Wire Harness Presses

Available either in semi-automatic (for bench-top use) configuration or in full automatic (integrated into a cut and strip machine) configuration.
Very compact and light, its spheroidal cast iron, one-piece structure offers the highest rigidity.
40mm Standard stroke (others available upon request).
Can be used with all mini-style applicators with standard T-coupling.
CFA can be fixed as an option.
135.8mm ± .02mm crimping height.
Standard safety cover has a "door opening" style by means of a latch; a state of art certified security switch assures the conformity to the norms and international laws.

Available either in semi-automatic (for bench-top use) configuration or in full automatic (integrated into a cut and strip machine) configuration.
40mm Standard stroke (others available upon request).
Can be used with all mini-style applicators with standard T-coupling.
CFA can be fixed as an option.
135.8mm ± .02mm crimping height.
The JOG option allows the operator to manually step-by-step cycle the press.
Variable stroke version also available (20mm to 40mm).
Kits available to adapt different size applicators upon request.

Available either in semi-automatic (for bench-top use) configuration or in full automatic (integrated into a cut and strip machine) configuration.
Can be used with all mini-style applicators with standard T-coupling.
CFA can be fixed as an option.
135.8mm ± .02mm crimping height.
Two-Post Crimping Dies with a 20mm-diameter coupling shank.
Standard variable stroke can be adjusted either to 40 or 50mm, with other strokes available upon request.
Fitted with a self-braking electric motor.
Crimp height can be adjusted to 212mm.

Crimp very big-section wires or to handle embossing process where pressure up and above 20 tons.
Accepts Extreme Duty Two-Post Die MSCS, with specific adapting shank.
Can also receive Two-Post Dies MSAS and MSAP.
Crimping height of 190 mm.
Regulating head which allows for a continuous setting of the crimping height.
0.1mm resolution and a 3.6mm range.
It is fitted with a 360° safety cover, the only open side of which is protected by a set of optical barriers.
All the controls are placed on two external control boxes.

Crimp very big-section wires or to handle embossing process where pressure up and above 15 tons.
Accepts Extreme Duty Two-Post Die MSCS, with specific adapting shank.
Can also receive Two-Post Dies MSAS and MSAP.
Crimping height of 190 mm.
Regulating head which allows for a continuous setting of the crimping height.
0.1mm resolution and a 3.6mm range.
It is fitted with a 360° safety cover, the only open side of which is protected by a set of optical barriers.
All the controls are placed on two external control boxes.

Crimp very big-section wires or to handle embossing process where pressure up and above 20 tons.
Accepts Extreme Duty Two-Post Die MSCS, with specific adapting shank.
Can also receive Two-Post Dies MSAS and MSAP.
Crimping height of 190 mm.
Regulating head which allows for a continuous setting of the crimping height.
0.1mm resolution and a 3.6mm range.
It is fitted with a 360° safety cover, the only open side of which is protected by a set of optical barriers.
All the controls are placed on two external control boxes.

Presses