Quality Control Accessories
PAL3001 - Press Analyzer
PAL3001 Spec Sheet — PDF
- PART NUMBER
- 871920060
- DIMENSION (mm)
- W 190 x H 240 x D 410
- DIMENSION (")
- W 7.48" x D 9.44" x D 16.14"
- WEIGHT
- 14 kg (31.1 lb)
- POWER SUPPLY
- 220 V 50Hz
- ACCESSORY SETUP
- Temp. 19 C° - Umidità 56%
- PULLING POWER MAX
- 2000 N
- PULLING POWER MIN
- 10 N
- WORK SPEED
- 15 - 120 mm/min
- Measures the force - expressed in Newton - needed to pull a terminal off a crimped wire.
- The pulling speed can be set between 15 and 120mm/minute.
- Has a serial communications port.
SMST - Crimp Pull Test Gauge
SMST Spec Sheet — PDF
- POWER
- battery 12V (rechargeable). 700 - 1100 m AH (depending on model)
- CHARGING DEVICE
- 115 - 230 VAC
- BATTERY CAPACITY
- 4 hours continuous operation (charge display on pc)
- MAX FORCE
- 20 kN
- MAX RESOLUTION
- 0.25 N
- MEASUREMENT ACCURACY HEIGHT
- 3 um
- DIMENSION (mm)
- 140 x 90 x 140
- WEIGHT
- 2.5 kg
- INTERFACE
- RS232
- RELAY OUTPUT
- potential free 24V DC (switching cycles programmable)
- Sophisticated, easy to use Electro Mechanic Device.
- Sets the Shut Height of a Crimping Press and evaluates its stability.
- All measured data are stored in a database and generate various reports.
- Proves the reliability of the press for a quality production.
Tooling Sentry System
TSS Spec Sheet — PDF
- Quality management system built around electronic Sentry Modules which attach to crimping presses.
- Enforces the maintenance of the consumable parts against the individual limits which were set.
- Limits can be set for every perishable part.
- Elapsed time given since last service of parts.
