Cutter / Strip Accessories
SC11 - Stripper Crimper
SC11 Spec Sheet — PDF
- PART NUMBER
- 790000016
- AIR PRESSURE
- 5 - 7
- DIMENSION (mm)
- W 212 x H 96 x D 98
- DIMENSION (")
- W 8.32" x H 3.78" x D 3.86"
- WEIGHT
- 5.1 kg (11.2 lb)
- POWER SUPPLY
- 18 V AC. 24 V DC
- WIRE SECTION
- 0.2-3mm2 (32-12 AWG) ø isolante max 4.5mm
- STRIPPING LENGTH
- 2 - 12mm (0.078 - 0.473")
- JACKET STRIPPING LENGTH
- min 25*mm (min 0.98" )*
- Wire-stripping unit that’s integrated with a crimping station (press and applicator).
- On one movement, wire is grabbed, stripped and moved over the anvil.
- Can strip wires up to 3mm2.
- Works with both end and side-feed applicators.
- Pneumatic actuating system grants ease of installation, use and maintenance.
- It can be cycled either by pedal or by a sensor that detects the presence of the wire.
SC12 - Stripper Crimper
SC12 Spec Sheet — PDF
- PART NUMBER
- 790000023
- AIR PRESSURE
- 5 - 7
- DIMENSION (mm)
- W 212 x H 96 x D 98
- DIMENSION (")
- W 8.32" x H 3.78" x D 3.86"
- WEIGHT
- 5.1 kg (11.2 lb)
- POWER SUPPLY
- 18 V AC. 24 V DC
- WIRE SECTION
- 0.2-6mm2 (32-9 AWG) ø isolante max 5.5mm
- STRIPPING LENGTH
- 2 - 12mm (0.078 - 0.473")
- Wire-stripping unit that’s integrated with a crimping station (press and applicator).
- On one movement, wire is grabbed, stripped and moved over the anvil.
- Can strip wires up to 6mm2.
- Works with both end and side-feed applicators.
- Pneumatic actuating system grants ease of installation, use and maintenance.
- It can be cycled either by pedal or by a sensor that detects the presence of the wire.
- Specifically designed to handle closed-barrel terminals.
SC19 - In Line Stripping Unit
SC19 Spec Sheet — PDF
- PART NUMBER
- 790000030
- AIR PRESSURE
- 5 - 7
- DIMENSION (mm)
- W 260 x H 120 x D 120
- DIMENSION (")
- W 10.2" x H 4.72" x D 4.72"
- WEIGHT
- 4.5 kg (9.88 lb)
- POWER SUPPLY
- 18 V AC. 24 V DC
- WIRE SECTION
- 0.2-2.5mm2 (32-13 AWG) ø isolante max 3.5mm
- STRIPPING LENGTH
- 2 - 12mm (0.078 - 0.473")
- JACKET STRIPPING LENGTH
- min 20*mm (min 0.78" )*
- Electro-pneumatic actuating system grants ease of installation, use and maintenance.
- It can strip a wire up to 2.5 mm2.
- Cycled either by pedal or by a sensor that detects the presence of the wire.
- Can be coupled to end-feed mini applicators or side-feed mini applicators.
- Can be used with multiple-core wires.
- When crimping side-feed terminals linked by front carrier, the minimum jacket stripping length is 20mm.
- Side-feed terminals the mini-mum jacket stripping length is 15mm.
- Quick set-up time and easy maintenance.
BCC - Bad Crimp Cutter
BCC Spec Sheet — PDF
- Pneumatic device operated with a CrimpForce Analyzer on a Crimping Press.
- Cuts the crimped terminal from the wire when the CFA detects a faulty crimp.
- It assures that no faulty crimps can be used for the final assembly.
TBPR - Heavy Duty Carrier Strip Cutter
TBPR Spec Sheet — PDF
- PART NUMBER
- 871600072
- AIR PRESSURE
- 5 - 7
- DIMENSION (mm)
- W 105 x H 197 x D 90
- DIMENSION (")
- W 4.13" x H 7.75" x D 3.54"
- WEIGHT
- 2.8 Kg (6.22 lb)
- Allows the carrier strip to be chopped dropping the scrap out of the way.
- Can handle carrier strip thickness above 1.5mm.
- A special external pneumatic actuating kit must be used to fit the TBPR cutter to a crimping press.