DESCRIPTION
Two-post die with manual feeding slide
CRIMPING HEIGHT
(7.48/8.346″) 190/272mm
STROKE
(1.968/1.575″) 50/40 mm
TERMINAL THICKNESS
(0.059″) above 1.5mm
WIRE SECTION
up to 75 mm2 (3/0 AWG)
FEEDING SYSTEM
Manual / Slide
WEIGHT
(29.9 lb) 13.6 Kg
DIMENSION (mm)
W 9 (without carter) 170 x H 210 x D 200
DIMENSION (“)
W 6.69 (without carter) x H 8.26 x D 7.87

  • For big loose terminals with thickness > 1.5mm and wire section up to 75mm2.
  • Continuous crimping height adjusting system.
  • Terminal is loaded by means of a manually operated system.
  • Pneumatic “side-feed” feeding system.
  • Wearing parts can be replaced without removing the applicator from the press.
  • Cycle counter non available.

Download Spec Sheet (PDF)