DESCRIPTION
- Two Post Die
- CRIMPING HEIGHT
- 142,6mm (5.61″)
- STROKE
- 50mm (1.97″)
- TERMINAL PITCH
- not binding
- TERMINAL THICKNESS
- 1.2 to 1.5mm (0.047″ to 0.059″)
- WIRE SECTION
- max 25mm2
- FEEDING SYSTEM
- air pipe Ø4mm, 5/6 Bar
- WEIGHT
- 17Kg (37.4lb)
- DIMENSION (mm)
- W 510 x H 210 x D 190
- DIMENSION (“)
- 20.1″ x 8.3″ x 7.5″
- CRIMP HEIGHT ADJUSTMENT
- 4 pads “H” head
MSMP two post die is an absolute new entry into the Mecal produts range. It can crimp terminals in carrier strip, with left-to-right feeding, and it has some new features compared to the existing two post dies. The upper plate is lighter and it’s equipped with a continuous regulation head (0,05mm), which allows a precise control on the conductor crimping height, whereas the insulation crimping can be set up by a new system placed on the front side of the die. This system is easily adjustable by a screw. The movement of the plate has been improved by means of two recirculating ball bushings. The MSMP is also equipped with a non-resettable 7 digits piece counter. Suitable presses for the MSMP are the P40 or P80, with the crimp force analyzer CFA/CPM designed by Mecal.