DESCRIPTION
Pneumatic end-feed two-post die
CRIMPING HEIGHT
(7.48/8.346″) 190/212 mm
STROKE
(1.968/1.575″) 50/40 mm
TERMINAL PITCH
not binding
TERMINAL THICKNESS
(0.059″) above 1.5 mm
WIRE SECTION
up to 75 mm2 (3/0 AWG)
FEEDING SYSTEM
air pressure 5/6 bar
WEIGHT
(37.4 lb) 17 Kg
DIMENSION (mm)
W 170 x H 210 x D 450
DIMENSION (“)
W 6.69 x H 8.26 x D 17.7

  • For big terminals linked “end to end,” rolled over a reel, with thickness > 1.5mm, wire section up to 75mm2.
  • Terminal pitch non binding.
  • Continuous crimping height adjusting system.
  • Pneumatic “end-feed” feeding system.
  • Wearing parts can be replaced without removing the applicator from the press.
  • Cycle counter non available.

Download Spec Sheet (PDF)