mecalbystarn_d4qwu2, Author at Mecal by Starn

This author has not yet filled in any details.
So far mecalbystarn_d4qwu2 has created 53 blog entries.

MRFP – Restyling Pneumatic End Feed

DESCRIPTION Restyling pneumatic end feed mini applicator CRIMPING HEIGHT (5.346") 135.8mm STROKE (1.575/1.18") 40/30mm

MRFP – Restyling Pneumatic End Feedmecalbystarn_d4qwu22021-03-03T09:27:59-05:00

CRIMPING HEIGHT (5.346") 135.8mm STROKE (1.1580/1.575") 30mm or 40mm TERMINAL PITCH not / whit

FMK – Heavy Duty 4 Points Crimp Applicatormecalbystarn_d4qwu22021-03-03T08:25:30-05:00

DESCRIPTION Extreme Duty Two-Post Die CRIMPING HEIGHT 190mm STROKE (1.968") 50 mm TERMINAL PITCH

MSC – Extreme Two Post Die Loose Terminalsmecalbystarn_d4qwu22021-03-03T09:28:34-05:00

DESCRIPTION Pneumatic end-feed two-post die CRIMPING HEIGHT (7.48/8.346") 190/212 mm STROKE (1.968/1.575") 50/40 mm TERMINAL

MSEP/F – Two Post Die Pneumatic End Feedmecalbystarn_d4qwu22020-05-01T14:12:50-04:00

DESCRIPTION Loose piece manual / slide CRIMPING HEIGHT (5,346") 135,8mm STROKE (1.575/1.18") 40/30mm WIRE SECTION

MRFSJ1 – Restyling with Manual Slidemecalbystarn_d4qwu22020-05-01T14:15:05-04:00

PART NUMBER 871920160 POWER battery 12V (rechargeable). 700 - 1100 m AH (depending

SMST – Crimp Pull Test Gaugemecalbystarn_d4qwu22020-03-09T15:43:45-04:00

PART NUMBER 871600072 AIR PRESSURE 5-7 Bars (70-100psi) DIMENSION (mm) W 105 x H 197

TBPR – Heavy Duty Carrier Strip Cuttermecalbystarn_d4qwu22019-11-21T14:52:37-05:00

PART NUMBER 790000030 AIR PRESSURE 5-7 Bars (70-100psi) DIMENSION (mm) W 260 x H 120

SC19 – In Line Stripping Unitmecalbystarn_d4qwu22019-11-21T14:49:29-05:00

PART NUMBER790000023AIR PRESSURE5-7 Bars (70-100psi)DIMENSION (mm)W 212 x H 96 x D 98DIMENSION (")W

SC12 – Stripper Crimpermecalbystarn_d4qwu22019-11-22T10:57:27-05:00

PART NUMBER 790000016 AIR PRESSURE 5-7 Bars (70-100psi) DIMENSION (mm) W 212 x H 96

SC11 – Stripper Crimpermecalbystarn_d4qwu22019-11-21T14:32:37-05:00