- For terminals linked end to end, rolled over a reel, with thickness < 1.2mm, terminal pitch 27-35 mm, wire section between 0 and 10mm2.
- Pneumatic end-feed feeding system. Can be supplied either with a continuous or a four-pad regulating head.
- Non-resettable 7-digit cycle counter, and with both cams either for terminal feeding on upstroke or downstroke.
- Fitted to any crimping press having a crimping height of 135.8mm (+/-) 0.02mm.
- Can be used in both manual and automatic configuration.
- Easy replacement of crimpers and anvils.
