Applicators | LMP Magnum Applicator – Pneumatic Left Side Feed

MSMP two post die is an absolute new entry into the Mecal produts range. It can crimp terminals in carrier strip, with left-to-right feeding, and it has some new features compared to the existing two post dies.

The upper plate is lighter and it’s equipped with a continuous regulation head (0,05mm), which allows a precise control on the conductor crimping height, whereas the insulation crimping can be set up by a new system placed on the front side of the die.

This system is easily adjustable by a screw. The movement of the plate has been improved by means of two recirculating ball bushings. The MSMP is also equipped with a non-resettable 7 digits piece counter.

Suitable presses for the MSMP are the P40 or P80, with the crimp force analyzer CFA/CPM designed by Mecal.

Product specifications

Applicators | LMP Magnum Applicator – Pneumatic Left Side Feed


Slide-Feed Magnum Applicator

Crimping Height




Terminal Pitch

Not Binding

Terminal Thickness

1.2 to 1.5mm
0.047″ to 0.059″

Wire Section

Max 25mm2 (3 AWG)

Feeding System

Air Pressure 5/6 Bar


7.4 Kg
16.3 lb


W 320 x H 145.5 x D 140 (mm)
W 12.5" x H 5.72" x D 5.51" (inches)

Continuous Regulating Head

0.01mm resolution, 0.00039″
2.7mm range, 0.106″